@article {6896, title = {Live imaging and quantitative analysis of gastrulation in mouse embryos using light-sheet microscopy and 3D tracking tools.}, journal = {Nature Protocols}, volume = {9}, year = {2014}, month = {2014 Mar}, pages = {575-85}, abstract = {

This protocol describes how to observe gastrulation in living mouse embryos by using light-sheet microscopy and computational tools to analyze the resulting image data at the single-cell level. We describe a series of techniques needed to image the embryos under physiological conditions, including how to hold mouse embryos without agarose embedding, how to transfer embryos without air exposure and how to construct environmental chambers for live imaging by digital scanned light-sheet microscopy (DSLM). Computational tools include manual and semiautomatic tracking programs that are developed for analyzing the large 4D data sets acquired with this system. Note that this protocol does not include details of how to build the light-sheet microscope itself. Time-lapse imaging ends within 12 h, with subsequent tracking analysis requiring 3-6 d. Other than some mouse-handling skills, this protocol requires no advanced skills or knowledge. Light-sheet microscopes are becoming more widely available, and thus the techniques outlined in this paper should be helpful for investigating mouse embryogenesis.

}, issn = {1750-2799}, doi = {10.1038/nprot.2014.035}, author = {Ichikawa, Takehiko and Nakazato, Kenichi and Keller, Philipp J and Kajiura-Kobayashi, Hiroko and Stelzer, Ernst H K and Mochizuki, Atsushi and Nonaka, Shigenori} } @article {6073, title = {Live imaging of whole mouse embryos during gastrulation: migration analyses of epiblast and mesodermal cells.}, journal = {PLoS One}, volume = {8}, year = {2013}, month = {2013 Jul 8}, pages = {e64506}, abstract = {

During gastrulation in the mouse embryo, dynamic cell movements including epiblast invagination and mesodermal layer expansion lead to the establishment of the three-layered body plan. The precise details of these movements, however, are sometimes elusive, because of the limitations in live imaging. To overcome this problem, we developed techniques to enable observation of living mouse embryos with digital scanned light sheet microscope (DSLM). The achieved deep and high time-resolution images of GFP-expressing nuclei and following 3D tracking analysis revealed the following findings: (i) Interkinetic nuclear migration (INM) occurs in the epiblast at embryonic day (E)6 and 6.5. (ii) INM-like migration occurs in the E5.5 embryo, when the epiblast is a monolayer and not yet pseudostratified. (iii) Primary driving force for INM at E6.5 is not pressure from neighboring nuclei. (iv) Mesodermal cells migrate not as a sheet but as individual cells without coordination.

}, issn = {1932-6203}, doi = {10.1371/journal.pone.0064506}, author = {Ichikawa, Takehiko and Nakazato, Kenichi and Keller, Philipp J and Kajiura-Kobayashi, Hiroko and Stelzer, Ernst H K and Mochizuki, Atsushi and Nonaka, Shigenori} } @article {4071, title = {Digital scanned laser light-sheet fluorescence microscopy (DSLM) of zebrafish and Drosophila embryonic development.}, journal = {Cold Spring Harbor Protocols}, volume = {2011}, year = {2011}, month = {2011 Oct}, pages = {1235-43}, abstract = {

Embryonic development is one of the most complex processes encountered in biology. In vertebrates and higher invertebrates, a single cell transforms into a fully functional organism comprising several tens of thousands of cells, arranged in tissues and organs that perform impressive tasks. In vivo observation of this biological process at high spatiotemporal resolution and over long periods of time is crucial for quantitative developmental biology. Importantly, such recordings must be realized without compromising the physiological development of the specimen. In digital scanned laser light-sheet fluorescence microscopy (DSLM), a specimen is rapidly scanned with a thin sheet of light while fluorescence is recorded perpendicular to the axis of illumination with a camera. Combining light-sheet technology and fast laser scanning, DSLM delivers quantitative data for entire embryos at high spatiotemporal resolution. Compared with confocal and two-photon fluorescence microscopy, DSLM exposes the embryo to at least three orders of magnitude less light energy, but still provides up to 50 times faster imaging speeds and a 10{\textendash}100-fold higher signal-to-noise ratio. By using automated image processing algorithms, DSLM images of embryogenesis can be converted into a digital representation. These digital embryos permit following cells as a function of time, revealing cell fate as well as cell origin. By means of such analyses, developmental building plans of tissues and organs can be determined in a whole-embryo context. This article presents a sample preparation and imaging protocol for studying the development of whole zebrafish and Drosophila embryos using DSLM.

}, issn = {1559-6095}, doi = {10.1101/pdb.prot065839}, author = {Keller, Philipp J and Schmidt, Annette D and Wittbrodt, Jochen and Stelzer, Ernst H K} } @article {1683, title = {Digital scanned laser light sheet fluorescence microscopy.}, journal = {Cold Spring Harbor Protocols}, volume = {2010}, year = {2010}, month = {2011 Oct}, pages = {pdb.top78}, abstract = {

Modern applications in the life sciences are frequently based on in vivo imaging of biological specimens, a domain for which light microscopy approaches are typically best suited. Often, quantitative information must be obtained from large multicellular organisms at the cellular or even subcellular level and with a good temporal resolution. However, this usually requires a combination of conflicting features: high imaging speed, low photobleaching and low phototoxicity in the specimen, good three-dimensional (3D) resolution, an excellent signal-to-noise ratio, and multiple-view imaging capability. The latter feature refers to the capability of recording a specimen along multiple directions, which is crucial for the imaging of large specimens with strong light-scattering or light-absorbing tissue properties. An imaging technique that fulfills these requirements is essential for many key applications: For example, studying fast cellular processes over long periods of time, imaging entire embryos throughout development, or reconstructing the formation of morphological defects in mutants. Here, we discuss digital scanned laser light sheet fluorescence microscopy (DSLM) as a novel tool for quantitative in vivo imaging in the post-genomic era and show how this emerging technique relates to the currently most widely applied 3D microscopy techniques in biology: confocal fluorescence microscopy and two-photon microscopy.

}, keywords = {Computer-Assisted, Confocal, Fluorescence, Image Processing, Microscopy}, issn = {1559-6095}, doi = {10.1101/pdb.top78}, author = {Keller, Philipp J and Stelzer, Ernst H K} } @article {2027, title = {Fast, high-contrast imaging of animal development with scanned light sheet-based structured-illumination microscopy.}, journal = {Nature Methods}, volume = {7}, year = {2010}, month = {08/2010}, pages = {637-42}, abstract = {

Recording light-microscopy images of large, nontransparent specimens, such as developing multicellular organisms, is complicated by decreased contrast resulting from light scattering. Early zebrafish development can be captured by standard light-sheet microscopy, but new imaging strategies are required to obtain high-quality data of late development or of less transparent organisms. We combined digital scanned laser light-sheet fluorescence microscopy with incoherent structured-illumination microscopy (DSLM-SI) and created structured-illumination patterns with continuously adjustable frequencies. Our method discriminates the specimen-related scattered background from signal fluorescence, thereby removing out-of-focus light and optimizing the contrast of in-focus structures. DSLM-SI provides rapid control of the illumination pattern, exceptional imaging quality, and high imaging speeds. We performed long-term imaging of zebrafish development for 58 h and fast multiple-view imaging of early Drosophila melanogaster development. We reconstructed cell positions over time from the Drosophila DSLM-SI data and created a fly digital embryo.

}, keywords = {Animals, Drosophila melanogaster, Embryo, Microscopy, Nonmammalian, Zebrafish}, issn = {1548-7105}, doi = {10.1038/nmeth.1476}, author = {Keller, Philipp J and Schmidt, Annette D and Santella, Anthony and Khairy, Khaled and Zhirong Bao and Wittbrodt, Joachim and Stelzer, Ernst H K} } @article {1681, title = {Nlcam modulates midline convergence during anterior neural plate morphogenesis.}, journal = {Developmental Biology}, volume = {339}, year = {2010}, month = {2010 Mar 1}, pages = {14-25}, abstract = {

During development, different cell types must undergo distinct morphogenetic programs so that tissues develop the right dimensions in the appropriate place. In early eye morphogenesis, retinal progenitor cells (RPCs) move first towards the midline, before turning around to migrate out into the evaginating optic vesicles. Neighbouring forebrain cells, however, converge rapidly and then remain at the midline. These differential behaviours are regulated by the transcription factor Rx3. Here, we identify a downstream target of Rx3, the Ig-domain protein Nlcam, and characterise its role in regulating cell migration during the initial phase of optic vesicle morphogenesis. Through sophisticated live imaging and comprehensive cell tracking experiments in zebrafish, we show that ectopic expression of Nlcam in RPCs, as is observed in Rx3 mutants, causes enhanced convergence of these cells. Expression levels of Nlcam therefore regulate the migratory properties of RPCs. Our results provide evidence that the two phases of optic vesicle morphogenesis: slowed convergence and outward-directed migration, are under different genetic control. We propose that Nlcam forms part of the guidance machinery directing rapid midline migration of forebrain precursors, where it is normally expressed, and that its ectopic expression upon loss of Rx3 imparts these migratory characteristics upon RPCs.

}, keywords = {Animals, Base Sequence, Body Patterning, Cell Adhesion Molecules, Chick Embryo, DNA Primers, Electrophoretic Mobility Shift Assay, Homeodomain Proteins, Morphogenesis, Neural Plate, Protein Binding, Zebrafish}, issn = {1095-564X}, doi = {10.1016/j.ydbio.2009.12.003}, author = {Brown, Katherine E and Keller, Philipp J and Ramialison, Mirana and Rembold, Martina and Stelzer, Ernst H K and Loosli, Felix and Wittbrodt, Joachim} } @article {1685, title = {Quantitative in vivo imaging of entire embryos with digital scanned laser light sheet fluorescence microscopy.}, journal = {Current Opinion in Neurobiology}, volume = {18}, year = {2008}, month = {2008 Dec}, pages = {624-32}, abstract = {

The observation of biological processes in their natural in vivo context is a key requirement for quantitative experimental studies in the life sciences. In many instances, it will be crucial to achieve high temporal and spatial resolution over long periods of time without compromising the physiological development of the specimen. Here, we discuss the principles underlying light sheet-based fluorescence microscopes. The most recent implementation DSLM is a tool optimized to deliver quantitative data for entire embryos at high spatio-temporal resolution. We compare DSLM to the two established light microscopy techniques: confocal and two-photon fluorescence microscopy. DSLM provides up to 50 times higher imaging speeds and a 10-100 times higher signal-to-noise ratio, while exposing the specimens to at least three orders of magnitude less light energy than confocal and two-photon fluorescence microscopes. We conclude with a perspective for future development.

}, keywords = {Animals, Computer-Assisted, Confocal, Fetus, Fluorescence, Humans, Image Processing, Lasers, Microscopy, Multiphoton, Photobleaching}, issn = {1873-6882}, doi = {10.1016/j.conb.2009.03.008}, author = {Keller, Philipp J and Stelzer, Ernst H K} } @article {1687, title = {Reconstruction of zebrafish early embryonic development by scanned light sheet microscopy.}, journal = {Science}, volume = {322}, year = {2008}, month = {2008 Nov 14}, pages = {1065-9}, abstract = {

A long-standing goal of biology is to map the behavior of all cells during vertebrate embryogenesis. We developed digital scanned laser light sheet fluorescence microscopy and recorded nuclei localization and movement in entire wild-type and mutant zebrafish embryos over the first 24 hours of development. Multiview in vivo imaging at 1.5 billion voxels per minute provides "digital embryos," that is, comprehensive databases of cell positions, divisions, and migratory tracks. Our analysis of global cell division patterns reveals a maternally defined initial morphodynamic symmetry break, which identifies the embryonic body axis. We further derive a model of germ layer formation and show that the mesendoderm forms from one-third of the embryo{\textquoteright}s cells in a single event. Our digital embryos, with 55 million nucleus entries, are provided as a resource.

}, keywords = {Algorithms, Animals, beta Catenin, Biological, Body Patterning, Cell Division, Cell Nucleus, Computer-Assisted, Databases, Embryo, Embryonic Development, Endoderm, Factual, Fluorescence, Germ Layers, Image Processing, Mesoderm, Microscopy, Models, Motion Pictures as Topic, Mutation, Nonmammalian, Software, Zebrafish}, issn = {1095-9203}, doi = {10.1126/science.1162493}, author = {Keller, Philipp J and Schmidt, Annette D and Wittbrodt, Joachim and Stelzer, Ernst H K} } @article {1688, title = {Three-dimensional microtubule behavior in Xenopus egg extracts reveals four dynamic states and state-dependent elastic properties.}, journal = {Biophysical Journal}, volume = {95}, year = {2008}, month = {2008 Aug}, pages = {1474-86}, abstract = {

Although microtubules are key players in many cellular processes, very little is known about their dynamic and mechanical properties in physiological three-dimensional environments. The conventional model of microtubule dynamic instability postulates two dynamic microtubule states, growth and shrinkage. However, several studies have indicated that such a model does not provide a comprehensive quantitative and qualitative description of microtubule behavior. Using three-dimensional laser light-sheet fluorescence microscopy and a three-dimensional sample preparation in spacious Teflon cylinders, we measured microtubule dynamic instability and elasticity in interphase Xenopus laevis egg extracts. Our data are inconsistent with a two-state model of microtubule dynamic instability and favor an extended four-state model with two independent metastable pause states over a three-state model with a single pause state. Moreover, our data on kinetic state transitions rule out a simple GTP cap model as the driving force of microtubule stabilization in egg extracts on timescales of a few seconds or longer. We determined the three-dimensional elastic properties of microtubules as a function of both the contour length and the dynamic state. Our results indicate that pausing microtubules are less flexible than growing microtubules and suggest a growth-speed-dependent persistence length. These data might hint toward mechanisms that enable microtubules to efficiently perform multiple different tasks in the cell and suggest the development of a unified model of microtubule dynamics and microtubule mechanics.

}, keywords = {Animals, Elasticity, Imaging, Mechanical, Microtubules, Ovum, Stress, Three-Dimensional, Xenopus laevis}, issn = {1542-0086}, doi = {10.1529/biophysj.107.128223}, author = {Keller, Philipp J and Pampaloni, Francesco and Lattanzi, Gianluca and Stelzer, Ernst H K} } @article {1689, title = {Three-dimensional preparation and imaging reveal intrinsic microtubule properties.}, journal = {Nature Methods}, volume = {4}, year = {2007}, month = {2007 Oct}, pages = {843-6}, abstract = {

We present an experimental investigation of microtubule dynamic instability in three dimensions, based on laser light-sheet fluorescence microscopy. We introduce three-dimensional (3D) preparation of Xenopus laevis egg extracts in Teflon-based cylinders and provide algorithms for 3D image processing. Our approach gives experimental access to the intrinsic dynamic properties of microtubules and to microtubule population statistics in single asters. We obtain evidence for a stochastic nature of microtubule pausing.

}, keywords = {Animals, Computer-Assisted, Fluorescence, Image Processing, Imaging, Microscopy, Microtubules, Ovum, Three-Dimensional, Xenopus laevis}, issn = {1548-7091}, doi = {10.1038/nmeth1087}, author = {Keller, Philipp J and Pampaloni, Francesco and Stelzer, Ernst H K} } @article {1690, title = {Life sciences require the third dimension.}, journal = {Current Opinion in Cell Biology}, volume = {18}, year = {2006}, month = {2006 Feb}, pages = {117-24}, abstract = {

Novel technologies are required for three-dimensional cell biology and biophysics. By three-dimensional we refer to experimental conditions that essentially try to avoid hard and flat surfaces and favour unconstrained sample dynamics. We believe that light-sheet-based microscopes are particularly well suited to studies of sensitive three-dimensional biological systems. The application of such instruments can be illustrated with examples from the biophysics of microtubule dynamics and three-dimensional cell cultures. Our experience leads us to suggest that three-dimensional approaches reveal new aspects of a system and enable experiments to be performed in a more physiological and hence clinically more relevant context.

}, keywords = {Animals, Biological Science Disciplines, Cell Line, Computer-Assisted, Dogs, Fluorescence, Image Processing, Imaging, Microscopy, Microtubules, Paclitaxel, Three-Dimensional}, issn = {0955-0674}, doi = {10.1016/j.ceb.2005.12.012}, author = {Keller, Philipp J and Pampaloni, Francesco and Stelzer, Ernst H K} } @article {1691, title = {Nud1p, the yeast homolog of Centriolin, regulates spindle pole body inheritance in meiosis.}, journal = {The EMBO Journal}, volume = {25}, year = {2006}, month = {2006 Aug 23}, pages = {3856-68}, abstract = {

Nud1p, a protein homologous to the mammalian centrosome and midbody component Centriolin, is a component of the budding yeast spindle pole body (SPB), with roles in anchorage of microtubules and regulation of the mitotic exit network during vegetative growth. Here we analyze the function of Nud1p during yeast meiosis. We find that a nud1-2 temperature-sensitive mutant has two meiosis-related defects that reflect genetically distinct functions of Nud1p. First, the mutation affects spore formation due to its late function during spore maturation. Second, and most important, the mutant loses its ability to distinguish between the ages of the four spindle pole bodies, which normally determine which SPB would be preferentially included in the mature spores. This affects the regulation of genome inheritance in starved meiotic cells and leads to the formation of random dyads instead of non-sister dyads under these conditions. Both functions of Nud1p are connected to the ability of Spc72p to bind to the outer plaque and half-bridge (via Kar1p) of the SPB.

}, keywords = {Cell Cycle Proteins, Deoxyribonucleases, Fungal, Genome, Humans, Meiosis, Microtubule-Associated Proteins, Mitotic Spindle Apparatus, Mutation, Nuclear Proteins, Protein Binding, Saccharomyces cerevisiae, Saccharomyces cerevisiae Proteins, Spores, tRNA Methyltransferases}, issn = {0261-4189}, doi = {10.1038/sj.emboj.7601254}, author = {Gordon, Oren and Taxis, Christof and Keller, Philipp J and Benjak, Aleksander and Stelzer, Ernst H K and Simchen, Giora and Knop, Michael} } @article {1692, title = {Spore number control and breeding in Saccharomyces cerevisiae: a key role for a self-organizing system.}, journal = {The Journal of Cell Biology}, volume = {171}, year = {2005}, month = {2005 Nov 21}, pages = {627-40}, abstract = {

Spindle pole bodies (SPBs) provide a structural basis for genome inheritance and spore formation during meiosis in yeast. Upon carbon source limitation during sporulation, the number of haploid spores formed per cell is reduced. We show that precise spore number control (SNC) fulfills two functions. SNC maximizes the production of spores (1-4) that are formed by a single cell. This is regulated by the concentration of three structural meiotic SPB components, which is dependent on available amounts of carbon source. Using experiments and computer simulation, we show that the molecular mechanism relies on a self-organizing system, which is able to generate particular patterns (different numbers of spores) in dependency on one single stimulus (gradually increasing amounts of SPB constituents). We also show that SNC enhances intratetrad mating, whereby maximal amounts of germinated spores are able to return to a diploid lifestyle without intermediary mitotic division. This is beneficial for the immediate fitness of the population of postmeiotic cells.

}, keywords = {Biological, Carbon, Centromere, Computer Simulation, Cytoplasm, Dominant, Electron, Fungal, Gene Expression Regulation, Genes, Genetic, Genetic Linkage, Genotype, Green Fluorescent Proteins, Haploidy, Meiosis, Microscopy, Mitotic Spindle Apparatus, Models, Mutation, Open Reading Frames, Plasmids, Recombination, Saccharomyces cerevisiae, Saccharomyces cerevisiae Proteins, Software, Spores, Time Factors, Video}, issn = {0021-9525}, doi = {10.1083/jcb.200507168}, author = {Taxis, Christof and Keller, Philipp and Kavagiou, Zaharoula and Jensen, Lars Juhl and Colombelli, Julien and Bork, Peer and Stelzer, Ernst H K and Knop, Michael} }