@article {47083, title = {Evaluation of super-resolution performance of the K2 electron-counting camera using 2D crystals of aquaporin-0.}, journal = {Journal of Structural Biology}, year = {2015}, month = {2015 Aug 28}, abstract = {

The K2 Summit camera was initially the only commercially available direct electron detection camera that was optimized for high-speed counting of primary electrons and was also the only one that implemented centroiding so that the resolution of the camera can be extended beyond the Nyquist limit set by the physical pixel size. In this study, we used well-characterized two-dimensional crystals of the membrane protein aquaporin-0 to characterize the performance of the camera below and beyond the physical Nyquist limit and to measure the influence of electron dose rate on image amplitudes and phases.

}, issn = {1095-8657}, doi = {10.1016/j.jsb.2015.08.015}, author = {Chiu, Po-Lin and Li, Xueming and Li, Zongli and Beckett, Brian and Brilot, Axel F and Grigorieff, Nikolaus and Agard, David A and Cheng, Yifan and Walz, Thomas} } @article {46571, title = {A primer to single-particle cryo-electron microscopy}, journal = {Cell }, volume = {161}, year = {2015}, month = {2015 Apr 23}, pages = {438-49}, chapter = {438-49}, abstract = {

Cryo-electron microscopy (cryo-EM) of single-particle specimens is used to determine the structure of proteins and macromolecular complexes without the need for crystals. Recent advances in detector technology and software algorithms now allow images of unprecedented quality to be recorded and structures to be determined at near-atomic resolution. However, compared with X-ray crystallography, cryo-EM is a young technique with distinct challenges. This primer explains the different steps and considerations involved in structure determination by single-particle cryo-EM to provide an overview for scientists wishing to understand more about this technique and the interpretation of data obtained with it, as well as a starting guide for new practitioners.

}, doi = {10.1016/j.cell.2015.03.050}, author = {Cheng, Yifan and Grigorieff, Nikolaus and Penczek, Pawel A and Walz, Thomas} } @article {45960, title = {Interactions of lipids with aquaporin-0 and other membrane proteins.}, journal = {Pfl{\"u}gers Archiv - European Journal of Physiology}, volume = {456}, year = {2008}, month = {2008 Jul}, pages = {651-61}, abstract = {

The structure of aquaporin-0 (AQP0) has recently been determined by electron crystallography of two-dimensional (2D) crystals and by X-ray crystallography of three-dimensional (3D) crystals. The electron crystallographic structure revealed nine lipids per AQP0 monomer, which form an almost complete bilayer. The lipids adopt a wide variety of conformations and tightly fill the space between adjacent AQP0 tetramers. The conformations of the lipid acyl chains appear to be determined not only by the protein surface but also by the acyl chains of adjacent lipid molecules. In the X-ray structure, the hydrophobic region of the protein is surrounded by a detergent micelle, with two ordered detergent molecules per AQP0 monomer. Despite the different environments, the electron crystallographic and X-ray structures of AQP0 are virtually identical, but they differ in the temperature factors of the atoms that either contact the lipids in the 2D crystals or are exposed to detergents in the 3D crystals. The temperature factors are higher in the X-ray structure, suggesting that the detergent-exposed AQP0 residues are less ordered than the corresponding ones contacting lipids in the 2D crystals. An examination of ordered detergent molecules in crystal structures of other aquaporins and of lipid molecules in 2D and 3D crystals of bacteriorhodopsin suggests that the increased conformational variability of detergent-exposed residues compared to lipid-contacting residues is a general feature.

}, keywords = {Animals, Aquaporins, Crystallization, Eye Proteins, Humans, Lipid Metabolism, Membrane Proteins, Models, Molecular, X-Ray Diffraction}, issn = {0031-6768}, doi = {10.1007/s00424-007-0353-9}, author = {Hite, Richard K and Gonen, Tamir and Harrison, Stephen C and Walz, Thomas} } @article {45964, title = {Junction-forming aquaporins.}, journal = {Current Opinion in Structural Biology}, volume = {18}, year = {2008}, month = {2008 Apr}, pages = {229-35}, abstract = {

Aquaporins (AQPs) are a family of ubiquitous membrane channels that conduct water and solutes across membranes. This review focuses on AQP0 and AQP4, which in addition to forming water channels also appear to play a role in cell adhesion. We discuss the recently determined structures of the membrane junctions mediated by these two AQPs, the mechanisms that regulate junction formation, and evidence that supports a role for AQP0 and AQP4 in cell adhesion.

}, keywords = {Animals, Aquaporin 4, Aquaporins, Eye Proteins, Humans, Intercellular Junctions, Models, Molecular, Protein Structure, Quaternary}, issn = {0959-440X}, doi = {10.1016/j.sbi.2007.11.003}, author = {Engel, Andreas and Fujiyoshi, Yoshinori and Gonen, Tamir and Walz, Thomas} } @article {45962, title = {Polymorphic assemblies and crystalline arrays of lens tetraspanin MP20.}, journal = {Journal of Molecular Biology}, volume = {376}, year = {2008}, month = {2008 Feb 15}, pages = {380-92}, abstract = {

Members of the tetraspanin superfamily function as transmembrane scaffold proteins that mediate the assembly of membrane proteins into specific signaling complexes. Tetraspanins also interact with each other and concentrate membrane proteins into tetraspanin-enriched microdomains (TEMs). Here we report that lens-specific tetraspanin MP20 can form multiple types of higher-order assemblies and we present crystalline arrays of MP20. When isolated in the absence of divalent cations, MP20 is solubilized predominantly in tetrameric form, whereas the presence of divalent cations during solubilization promotes the association of MP20 tetramers into higher-order species. This effect only occurs when divalent cations are present during solubilization but not when divalent cations are added to solubilized tetrameric MP20, suggesting that other factors may also be involved. When purified MP20 tetramers are reconstituted with native lens lipids in the presence of magnesium, MP20 forms two-dimensional (2D) crystals. A projection map at 18 A resolution calculated from negatively stained 2D crystals showed that the building block of the crystal is an octamer consisting of two tetramers related to each other by 2-fold symmetry. In addition to 2D crystals, reconstitution of MP20 with native lipids also produced a variety of large protein-lipid complexes, and we present three-dimensional (3D) reconstructions of the four most abundant of these complexes in negative stain. The various complexes formed by MP20 most likely reflect the many ways in which tetraspanins can interact with each other to allow formation of TEMs.

}, keywords = {Animals, Buffers, Cations, Divalent, Cell Membrane, Chelating Agents, Crystallization, Detergents, Edetic Acid, Egtazic Acid, Eye Proteins, Hydrogen-Ion Concentration, Imaging, Three-Dimensional, Lens, Crystalline, Lipid Metabolism, Magnesium, Membrane Microdomains, Membrane Proteins, Protein Structure, Secondary, Protein Structure, Tertiary, Sheep, Silver Staining, Solubility, Tromethamine}, issn = {1089-8638}, doi = {10.1016/j.jmb.2007.09.001}, author = {Gonen, Tamir and Hite, Richard K and Cheng, Yifan and Petre, Benjamin M and Kistler, Joerg and Walz, Thomas} } @article {45959, title = {Projection map of aquaporin-9 at 7 A resolution.}, journal = {Journal of Molecular Biology}, volume = {367}, year = {2007}, month = {2007 Mar 16}, pages = {80-8}, abstract = {

Aquaporin-9, an aquaglyceroporin present in diverse tissues, is unique among aquaporins because it is not only permeable to water, urea and glycerol, but also allows passage of larger uncharged solutes. Single particle analysis of negatively stained recombinant rat aquaporin-9 revealed a particle size characteristic of the tetrameric organization of all members of the aquaporin family. Reconstitution of aquaporin-9 into two-dimensional crystals enabled us to calculate a projection map at 7 A resolution. The projection structure indicates a tetrameric structure, similar to GlpF, with each square-like monomer forming a pore. A comparison of the pore-lining residues between the crystal structure of GlpF and a homology model of aquaporin-9 locates substitutions in these residues predominantly to the hydrophobic edge of the tripathic pore of GlpF, providing first insights into the structural basis for the broader substrate specificity of aquaporin-9.

}, keywords = {Animals, Aquaporins, Crystallography, Escherichia coli, Escherichia coli Proteins, Gene Expression, Models, Molecular, Protein Conformation, Rats, Recombinant Proteins}, issn = {0022-2836}, doi = {10.1016/j.jmb.2006.12.042}, author = {Viadiu, Hector and Gonen, Tamir and Walz, Thomas} } @article {45958, title = {The structure of aquaporins.}, journal = {Quarterly Reviews of Biophysics}, volume = {39}, year = {2006}, month = {2006 Nov}, pages = {361-96}, abstract = {

The ubiquitous members of the aquaporin (AQP) family form transmembrane pores that are either exclusive for water (aquaporins) or are also permeable for other small neutral solutes such as glycerol (aquaglyceroporins). The purpose of this review is to provide an overview of our current knowledge of AQP structures and to describe the structural features that define the function of these membrane pores. The review will discuss the mechanisms governing water conduction, proton exclusion and substrate specificity, and how the pore permeability is regulated in different members of the AQP family.

}, keywords = {Amino Acid Sequence, Animals, Aquaporins, Cell Membrane, Cell Membrane Permeability, Humans, Ion Channel Gating, Molecular Sequence Data, Protein Conformation, Water}, issn = {0033-5835}, doi = {10.1017/S0033583506004458}, author = {Gonen, Tamir and Walz, Thomas} } @article {45957, title = {Lipid-protein interactions in double-layered two-dimensional AQP0 crystals.}, journal = {Nature}, volume = {438}, year = {2005}, month = {2005 Dec 1}, pages = {633-8}, abstract = {

Lens-specific aquaporin-0 (AQP0) functions as a specific water pore and forms the thin junctions between fibre cells. Here we describe a 1.9 A resolution structure of junctional AQP0, determined by electron crystallography of double-layered two-dimensional crystals. Comparison of junctional and non-junctional AQP0 structures shows that junction formation depends on a conformational switch in an extracellular loop, which may result from cleavage of the cytoplasmic amino and carboxy termini. In the centre of the water pathway, the closed pore in junctional AQP0 retains only three water molecules, which are too widely spaced to form hydrogen bonds with each other. Packing interactions between AQP0 tetramers in the crystalline array are mediated by lipid molecules, which assume preferred conformations. We were therefore able to build an atomic model for the lipid bilayer surrounding the AQP0 tetramers, and we describe lipid-protein interactions.

}, keywords = {Animals, Aquaporins, Crystallization, Crystallography, Hydrogen Bonding, Lens, Crystalline, Lipid Bilayers, Membrane Lipids, Models, Molecular, Protein Binding, Protein Structure, Quaternary, Sheep, Water}, issn = {1476-4687}, doi = {10.1038/nature04321}, author = {Gonen, Tamir and Cheng, Yifan and Sliz, Piotr and Hiroaki, Yoko and Fujiyoshi, Yoshinori and Harrison, Stephen C and Walz, Thomas} } @article {45956, title = {Aquaporin-0 membrane junctions form upon proteolytic cleavage.}, journal = {Journal of Molecular Biology}, volume = {342}, year = {2004}, month = {2004 Sep 24}, pages = {1337-45}, abstract = {

Aquaporin-0 (AQP0), previously known as major intrinsic protein (MIP), is the only water pore protein expressed in lens fiber cells. AQP0 is highly specific to lens fiber cells and constitutes the most abundant intrinsic membrane protein in these cells. The protein is initially expressed as a full-length protein in young fiber cells in the lens cortex, but becomes increasingly cleaved in the lens core region. Reconstitution of AQP0 isolated from the core of sheep lenses containing a proportion of truncated protein, produced double-layered two-dimensional (2D) crystals, which displayed the same dimensions as the thin 11 nm lens fiber cell junctions, which are prominent in the lens core. In contrast reconstitution of full-length AQP0 isolated from the lens cortex reproducibly yielded single-layered 2D crystals. We present electron diffraction patterns and projection maps of both crystal types. We show that cleavage of the intracellular C terminus enhances the adhesive properties of the extracellular surface of AQP0, indicating a conformational change in the molecule. This change of function of AQP0 from a water pore in the cortex to an adhesion molecule in the lens core constitutes another manifestation of the gene sharing concept originally proposed on the basis of the dual function of crystallins.

}, keywords = {Amino Acid Sequence, Animals, Aquaporins, Biopolymers, Eye Proteins, Hydrolysis, Membrane Glycoproteins, Microscopy, Electron, Molecular Sequence Data, Sheep}, issn = {0022-2836}, doi = {10.1016/j.jmb.2004.07.076}, author = {Gonen, Tamir and Cheng, Yifan and Kistler, Joerg and Walz, Thomas} } @article {45955, title = {Aquaporin-0 membrane junctions reveal the structure of a closed water pore.}, journal = {Nature}, volume = {429}, year = {2004}, month = {2004 May 13}, pages = {193-7}, abstract = {

The lens-specific water pore aquaporin-0 (AQP0) is the only aquaporin known to form membrane junctions in vivo. We show here that AQP0 from the lens core, containing some carboxy-terminally cleaved AQP0, forms double-layered crystals that recapitulate in vivo junctions. We present the structure of the AQP0 membrane junction as determined by electron crystallography. The junction is formed by three localized interactions between AQP0 molecules in adjoining membranes, mainly mediated by proline residues conserved in AQP0s from different species but not present in most other aquaporins. Whereas all previously determined aquaporin structures show the pore in an open conformation, the water pore is closed in AQP0 junctions. The water pathway in AQP0 also contains an additional pore constriction, not seen in other known aquaporin structures, which may be responsible for pore gating.

}, keywords = {Animals, Aquaporins, Biological Transport, Cell Membrane, Cell Membrane Permeability, Cryoelectron Microscopy, Crystallization, Electric Conductivity, Eye Proteins, Hydrogen-Ion Concentration, Lens, Crystalline, Membrane Glycoproteins, Models, Molecular, Molecular Sequence Data, Protein Conformation, Sheep, Water}, issn = {1476-4687}, doi = {10.1038/nature02503}, author = {Gonen, Tamir and Sliz, Piotr and Kistler, Joerg and Cheng, Yifan and Walz, Thomas} }